What can we help you with?
< All Topics
Print

SDA-200 Owner’s Manual

Download PDF Manual>>>
PDF Manual Library>>> | PDF Specifications Library>>> | PDF CAD Library>>>

SAFETY INSTRUCTIONS

DA12050-manual-warning-caution-electrical-shock

Explanation of Graphical Symbols

lightening dash with arrowhead symbol
The lightning dash with arrowhead symbol, within an equilateral triangle is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
DA12050-manual-warning-exclamationpoint-1
The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

1. Read Instructions – All the safety and operating instructions should be read before the appliance is operated.

2. Retain Instructions – The safety and operating instructions should be retained for future reference.

3. Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to.

4. Follow Instructions – All operating and other instructions should be followed.

5. Water and Moisture – The appliance should not be used near water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.

6. Carts and Stands – The appliance should be used only with a cart or stand that is recommended by the manufacturer.

Portable Cart Warning
PORTABLE CART WARNING

7. Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

8. Ventilation – The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.


APPLICABLE FOR USA, CANADA, OR WHERE APPROVED FOR
USAGE

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
PLUG TO WIDE SLOT, INSERT FULLY.

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE
LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND.


9. Heat – The appliance should be situated away from heat sources such as radiators, stoves, or other appliances that produce heat.

10. Power Source – The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

11. Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

12. Cleaning – The appliance should be cleaned only as recommended by the manufacturer.

13. Nonuse Periods – The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

14. Object and Liquid Entry – Care should be taken so that objects do not fall into and liquids are not spilled into the inside of the appliance.

15. Damage Requiring Service – The appliance should be serviced by qualified service personnel when:
        a. The power-supply cord or the plug has been damaged, or
        b. Objects have fallen onto, or liquid has been spilled into the appliance; or
        c. The appliance has been exposed to rain; or
        d. The appliance does not appear to operate normally or exhibits a marked change in performance; or
        e. The appliance has been dropped, or the cabinet damaged.

16. Servicing – The user should not attempt to service the appliance beyond those means described in the operating instructions. All other servicing should be referred to qualified service personnel.

17. Grounding or Polarization – The precautions that should be taken so that the grounding or polarization means of an appliance is not defeated.

FEATURES

1. 1U Stack Height
2. 200 Watts at 4Ω
3. Speaker level inputs and outputs
4. 12v AC/DC remote power on trigger input
5. 12v control out remote power on trigger for other devices with voltage trigger 6. Rack mountable (Rack ears included)

FUNCTIONS

Volume Controls – Adjusts volume to desired levels
Phase Controls – Adjusts phase from 0° to 180°
Crossover Controls – Adjusts crossover from 40Hz to 120Hz

POWER MODE SELECTION

1. Manual

2. Trigger

3. Audio Sense

SPECIFICATIONS

Rated Power Output: 200 Watts at 4Ω

Input Impedance: >12K Ω

Crossover: 40Hz to 120Hz

Phase: 0° to 180°

Frequency Response: 30Hz to 120Hz at -3dB

Low Pass Filter: 24dB/Oct

High Pass Filter: 15dB/Oct

Trigger Sensitivity: 3V to 24VDC

Total Harmonic Distortion: <0.3% at 200 Watts
<0.1% at 150 Watts

Auto ON Senses: 5.6mV

Auto ON delay time: 5 Secs

Auto OFF delay time: 5 Minutes

Fuse Rating: 120V

Version: T4A/250V

Front Panel

SDA-200 front panel callouts

Back Panel

SDA-200 back panel callouts

LIMITED 5-YEAR WARRANTY

Vanguard Dynamics warrants to the original retail purchaser only that this Vanguard Dynamics product will be free from defects in materials and workmanship for a period of five years, provided the product was purchased from a Vanguard Dynamics Authorized Dealer. Defective products must be shipped, together with proof of purchase, prepaid and insured to the Vanguard Dynamics Authorized Dealer from whom they were purchased, or to the Vanguard Dynamics factory at the address listed on this installation instruction manual. Freight collect shipments will be refused. It is preferable to ship this product in the original shipping container to lessen the chance of transit damage. In any case, the risk or loss or damage in transit is to be borne by the purchaser.

If upon examination at the Factory or Vanguard Dynamics Authorized Dealer it is determined that the unit was defective in materials or workmanship at any time during this warranty period, Vanguard Dynamics or the Vanguard Dynamics Authorized Dealer will, at its option, repair or replace this product at no additional charge, except as set forth below. If this model is no longer available and can not be repaired effectively, Vanguard Dynamics, at its sole option may replace the unit with a current model of equal or greater value. In some cases where a new model is substituted, a modification to the mounting surface may be required. If mounting surface modification is required, Vanguard Dynamics assumes no responsibility or liability for such modification.

All replacement parts and products become the property of Vanguard Dynamics. Products replaced or repaired under this warranty will be returned to the original retail purchaser, within a reasonable time, with freight prepaid. This warranty does not include procedures, commercial use, voltage inputs in excess of the rated maximum of the unit, or service, repair or modification of the product which has not been authorized or approved by Vanguard Dynamics. This warranty also excludes normal cosmetic deterioration caused by environmental conditions.

This warranty will be void if the serial number on the product has been removed, tampered with or defaced. This warranty is in lieu of all other expressed warranties. If the product is defective in materials or workmanship as warranted above, the purchaser’s sole remedy shall be repair or replacement as provided above. In no event will Vanguard Dynamics be liable for any incidental or consequential damages arising out of the use or inability to use the product, even if Vanguard Dynamics or a Vanguard Dynamics Authorized Dealer has been advised of the possibility of such damages, or for any claim by any other party. Some states do not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply. All implied warranties on the product are limited to the duration of this expressed warranty. Some states do not allow limitations on the length of an implied warranty. If the original retail purchaser resides in such a state, this limitation does not apply.

Limited 5 Year Warranty

SDA200-10-2023

Table of Contents